Graphite Brake
 |
| Traxxas Revo Graphite Brake Disc disk by 3Racing RE 015 | |
 |
$6.99 Time Remaining: 29d 6h 39m Buy It Now for only: $6.99 |
| Integy INT T7915 Graphite Brake Disk Set for Traxxas Jato | |
 |
$9.00 Time Remaining: 2d 13m |
| INTEGY T3145 GRAPHITE BRAKE DISK REVO 25 25R 33 | |
 |
$7.87 Time Remaining: 10d 5h 36m Buy It Now for only: $7.87 |
| HPI Hellfire Oversized Vented Graphite Brake Disk | |
 |
$11.99 Time Remaining: 24d 7h 38m Buy It Now for only: $11.99 |
| Integy Graphite Disk Brake Set Savage T7054 | |
 |
$8.99 Time Remaining: 23d 11h 51m Buy It Now for only: $8.99 |
| Integy Graphite Carbon Fiber Brake Disk for Traxxas Jato 25 33 | |
 |
$12.77 Time Remaining: 21d 10h 59m Buy It Now for only: $12.77 |
| T MAXX 2533 GRAPHITE BRAKE DISK | |
 |
$8.99 Time Remaining: 7h 35m Buy It Now for only: $8.99 |
| Traxxas REVO Vented Graphite Brake Disc by Integy | |
 |
$7.99 Time Remaining: 17d 1h 41m Buy It Now for only: $7.99 |
| GPM GRAPHITE BRAKE PAD FOR HPI NITRO RS4 3 III | |
 |
$7.99 Time Remaining: 13d 22h 47m Buy It Now for only: $7.99 |
| Traxxas TMaxx Alloy Graphite Brake Disc by RPM 1039G | |
 |
$13.50 Time Remaining: 27d 7h 20m Buy It Now for only: $13.50 |
| STEEL BRAKE DISK GRAPHITE PAD w ALUMINUM ADAPTOR B FOR TRAXXAS JATO 25 33 | |
 |
$16.99 Time Remaining: 23d 20h 31m Buy It Now for only: $16.99 |
| INTEGY T7054 GRAPHITE DISK BRAKE SET SAVAGE NEW | |
 |
$11.21 Time Remaining: 24d 7h 6m Buy It Now for only: $11.21 |
| Graphite Brake Pad Fits Traxxas Jato 25 33 Nitro 33 | |
 |
$9.99 Time Remaining: 4d 13h 59m Buy It Now for only: $9.99 |
| GPM Graphite Brake Pad for HPI MT2 RS4 3 | |
 |
$8.90 Time Remaining: 28d 1h 18m Buy It Now for only: $8.90 |
| GPM Graphite brake disc GNMT2039L fits HPI MT2 30 | |
 |
$8.90 Time Remaining: 20d 17h 25m Buy It Now for only: $8.90 |
| Kyosho V One RRR Graphite Brake Linkage by Atomic Racing | |
 |
$8.90 Time Remaining: 13d 1h 41m Buy It Now for only: $8.90 |
| iNTEGY Graphite Disk Brake 2 for HPI Hellfire 1 8 | |
 |
$10.99 Time Remaining: 25d 12h 10m Buy It Now for only: $10.99 |
| GPM graphite brake disc NRS3039G fits HPI RS4 3 MT2 30 | |
 |
$12.90 Time Remaining: 12d 15h 10m Buy It Now for only: $12.90 |
| GPM Graphite Brake Disk NRS3039G for HPI Nitro RS4 3 | |
 |
$13.90 Time Remaining: 21d 23h Buy It Now for only: $13.90 |
| HPI Nitro MT steel graphite brake disc kit NMT4039SG | |
 |
$21.95 Time Remaining: 6h 11m Buy It Now for only: $21.95 |
| NEW Integy Graphite Brake Disk Revo T3145 NIB | |
 |
$9.29 Time Remaining: 16d 3h 24m Buy It Now for only: $9.29 |
| Integy Revo Graphite Brake Disc | |
 |
$14.35 Time Remaining: 4d 1h 35m Buy It Now for only: $14.35 |
| Team Integy Traxxas Revo Graphite Brake Disk | |
 |
$8.95 Time Remaining: 24d 3h 21m Buy It Now for only: $8.95 |
| Integy Graphite Brake Disc Revo INTT3145 | |
 |
$8.29 Time Remaining: 1d 23h 31m Buy It Now for only: $8.29 |
| GPM GRAPHITE BRAKE DISK FOR HPI NITRO RS4 3 III | |
 |
$12.99 Time Remaining: 13d 22h 16m Buy It Now for only: $12.99 |
| iNTEGY Graphite Disk Brake for HPI Savage X 21 25 | |
 |
$13.99 Time Remaining: 10d 6h 44m Buy It Now for only: $13.99 |
| HPI RS4 2 RACER SUPER NITRO A844 GRAPHITE CARBON SLOTTED BRAKE DISC PAD PACKAGE | |
 |
$24.50 Time Remaining: 4d 22h 22m Buy It Now for only: $24.50 |
| Integy HPI Savage graphite disk brake set NIP INTT7054 | |
 |
$13.99 Time Remaining: 23d 3h 48m Buy It Now for only: $13.99 |
| GPM GRAPHITE BRAKE DISK 4PC CEN GENESIS NEMESIS GST 77 | |
 |
$10.99 Time Remaining: 11d 18h 24m Buy It Now for only: $10.99 |
| GPM GRAPHITE BRAKE PAD 6PCS CEN GENESIS NEMESIS GST 77 46 | |
 |
$11.99 Time Remaining: 11d 18h 25m Buy It Now for only: $11.99 |
| Integy HPI Savage graphite disk brake set NIP INTT7054 | |
 |
$12.99 Time Remaining: 23d 3h 53m Buy It Now for only: $12.99 |
| CARBON BRAKE DISK GRAPHITE PAD +ADAPTOR TRAXXAS JATO | |
 |
$16.99 Time Remaining: 16d 16h 34m Buy It Now for only: $16.99 |
| TEAM LOSI GRAPHITE BRAKE ARM W PAD A 9402NXT | |
 |
$9.99 Time Remaining: 16d 10h 2m Buy It Now for only: $9.99 |
| GPM Graphite Pad + Steel Brake Disk HPI Nitro MT2 G30 | |
 |
$15.99 Time Remaining: 26d 8h 25m Buy It Now for only: $15.99 |
| Mugen Graphite Brake Bracket MRX5 MUGH2302 | |
 |
$16.19 Time Remaining: 6d 22h 40m Buy It Now for only: $16.19 |
| TITANUM BRAKE DISC GRAPHITE PLATE Fits MONSTER GT | |
 |
$26.99 Time Remaining: 3d 10h 17m Buy It Now for only: $26.99 |
| Graphite Brake Disk For HPI Nitro RS4 3 III | |
 |
$9.99 Time Remaining: 19d 11h 8m Buy It Now for only: $9.99 |
| iNTEGY Graphite Disk Brake 2 for HPI Hellfire | |
 |
$15.99 Time Remaining: 4d 14h 14m Buy It Now for only: $15.99 |
| 3 Racing Woven Graphite Brake Bracket For Serpent 710 | |
 |
$10.20 Time Remaining: 12d 18h 3m Buy It Now for only: $10.20 |
| Alloy Brake Graphite Pad+Disc Fits Traxxas Jato 25 33 | |
 |
$33.99 Time Remaining: 7d 18h 44m Buy It Now for only: $33.99 |
| 3 Racing SSG Graphite Brake Bracket For Serpent 710 | |
 |
$11.50 Time Remaining: 12d 18h 3m Buy It Now for only: $11.50 |
| GPM GRAPHITE BRAKE DISK PAD FOR HPI NITRO MT2 G30 18 | |
 |
$16.99 Time Remaining: 12d 6h 22m Buy It Now for only: $16.99 |
Favorite Motorcycle Tech Tips
Electrical
- High-pressure car washes can force water into the plugs, wires and electrical connector plugs. The water in these connectors can change resistance values and will cause poor performance and misfiring even when everything appears to be dry.
- When working with electrical components and wiring connections, always use dielectric grease in the connectors to prevent moisture and corrosion from building up.
- When troubleshooting electrical issues, always start with a battery that you know is good. If you suspect the battery is the issue, have it charged and load-tested before beginning diagnosis.
- When installing additional electrical components to stock wiring harnesses on any motorcycle, make sure you use heat shrink tubing and inline fuses on the power leads and wherever connections are made. The idea is to waterproof them as much as possible.
Maintenance
- Always check the oil when the bike is in the position outlined in the manual.
- The first tool out of the toolbox should be your manual.
- Check your tire pressure when the tires are cold.
- When changing the motor oil and using a spin-on filter, always coat the rubber seal with fresh oil.
- When installing the derby O-ring on pre-2000 model Big Twins, sometimes it's difficult to get it to seat properly and hold long enough to install the cover. Use a thin layer of grease on the O-ring and you'll find the primary surface holds it in place as well as adds a little extra seal to the derby cover.
Exhaust
- Spraying ceramic-heat paint or high-temperature paint inside newexhaust pipes before bolting them onto the bike may prevent discoloration on drag pipes that don't have a heat shield option.
- After installing exhaust pipes, make sure you clean them before running the bike. Fingerprints and oil can burn discolored spots in the exhaust.
- Boot and rain suit material can easily be removed from exhaust heat shields using Easy Off oven cleaner. Just heat the pipes up to operating temperature and apply the Easy Off. The material will wipe right off! But be sure to cover up anything that's painted because this product gobbles up paint, too,
Carbs/Fuel
- Before trying to re-jet your carburetor, you should make sure that your timing is set properly and — if you have a mechanical advance — make sure it's not worn out. A worn-out advance unit will allow your timing to advance too far and show up as a lean condition on a perfectly jetted carburetor.
- When experiencing starting issues, make sure there's gas in the tank.
Engines
- The most common cause of pushrod cover leaks is the pushrod rubbing the inside of the pushrod cover. One way that you can avoid this is to chamfer the inside edge of the top tube at the middle and at the top.
- Adjust valves (as needed) with the engine dead cold.
Brakes
- If you're having trouble bleeding your brake or hydraulic clutch line, slowly pull the lever in and let it flick back out. Keep doing this for a few minutes. Eventually this will draw air up to the master cylinder and you'll start to see bubbles coming up out of the cylinder.
- If you install all-new brake lines and you're bleeding the system, make sure to bleed the fittings that connect the line to the master cylinder and the caliper.
Oil Tanks
- Never use a silicone sealant when installing oil pump gaskets. Silicone can clog oil passages in your engine, causing costly damage. A good coat of aluminum-based paint or a copper spray sealant can give good results on paper or Mylar gaskets.
Driveline
- Sprockets are usually only good for the life of two chains, then it's best to replace both sprockets and chain at one time. Worn out sprockets will ruin a new chain in no time.
Wheels
- It's a good idea to service front and rear wheel ball bearings every spring or every 5,000 miles, whichever comes first. Keep the pressure washer away from the bearings.
Handlebar Controls
- Lubricate the throttle sleeve and housing with a light coating of graphite.
- To remove handgrips, use a long thin ice pick or screwdriver. Slip it lengthwise between the grip and bar or the throttle sleeve as far in it will go. Spray WD 40 or contact cleaner in the cavity created. With a twisting motion, remove the grip. If that didn't work, repeat the procedure.
- For maximum life of throttle cables, lubricate every 5,000 miles. Lubricate the cable with light oil or cable lube and lubricate the elbow with grease.
Frames
- When installing shorter shocks, first check the tire fender clearance. In order to do this, install one shock with the spring removed and compress the shock. You must have at least a 1-inch clearance from the top of the tire to the fender to allow for the growth at higher speeds. With shocks removed, check the swing arm bearings.
Forks
- When replacing fork seals, always put a piece of wax paper over the end of fork tubes before sliding the new fork seals on. This will protect the new seal lip.
Windshields
- Never clean acrylic screens with ammonia-based cleaning products or glass cleaner. The solvent action of the glass cleaner will destroy the acrylic. Do not allow brake fluid, alcohol or strong solvents to come in contact with the screen. Permanent damage will result.
Parts Installation
- When installing parts and accessories, always be sure to read the instructions and verify that all parts are included prior to disassembly of the motorcycle.
- Stay organized — when taking a part off, keep it in order of removal, including bolts, washers and nuts. That's so when you install the new part, all you have to do is follow the trail of parts. It also helps to keep tools organized. Only keep the tools you will use in your work area.
We hope some of these basic tech tips were helpful. For more technical-related tips, feel free to check out The Tech Tips and Tricks series by Easyriders. As always, if you have questions or need assistance picking out performance parts to suit your needs, don't hesitate to chat with a J&P technician via Live Chat. Or call J&P's technical support staff at (800) 397-4844.
About the Author
You can find more information and all the motorcycle parts and accessories you need at J&P Cycles. J&P Cycles carries Harley parts, Vintage Harley parts, metric cruiser parts and Gold Wing parts.
Welcome to Toys Online Store. we have a great variety of Graphite Brake for you to choose from below, and if you don"t find any Graphite Brake products you were looking for, have a look around the site and bookmark us and come back latter on as we add more products on Graphite Brakes everyday. Either way I hope you find the right Graphite Brake for a great price.